Been working on cleaning up the interior and removing exterior parts like the police spotlights, taking off stickers and other miscellaneous items the PO had on it.
Also started sanding the roof, sides and interior. Going to seal everything with 2 part epoxy. 1 coat of the epoxy on the roof is already done.
Getting colder here in Northern Va so don't know how much more I will get done before winter slows things down?
First Challenge After Driving off trailer she won't start now??
Well after driving around in the stepvan before buying it, now its cold and it won't start. I'm prolly flooding it out.
Got to figure out what carb it is?
Also could be the fuel pump pumping with too much pressure to the carb?
Spent some time and figured out it is the Rochester monojet carb the PO put on.
Don't think its the carb cause it won't start even with starter fluid. So, I think its spark related.
Checked out the wires to the distributer and the problem was a loose wire to the ignition module. Vibration over time caused it to break at the crimped joint. All good now she starts up and runs great again!
Got to figure out what carb it is?
Also could be the fuel pump pumping with too much pressure to the carb?
Spent some time and figured out it is the Rochester monojet carb the PO put on.
Don't think its the carb cause it won't start even with starter fluid. So, I think its spark related.
Checked out the wires to the distributer and the problem was a loose wire to the ignition module. Vibration over time caused it to break at the crimped joint. All good now she starts up and runs great again!
Subscribe to:
Posts (Atom)